Chemspec Liquid Formula 90 5L

A Triple strength new generation, multiple dilution carpet detergent

A high performance liquid carpet extraction detergent with a fully crystallising residue. Leaves behind no stickiness that could cause resoiling. See the pH below for the variables of use which allow this detergent to get stronger the more detergent you add. This detergent is "Woolsafe" approved up to a 500 to 1 dilution and gets stronger in pH value the more you add, up to a massive 980 to 1 dilution. This massive nearly 1000 to 1 dilution makes this product have the cheapest cost at use in the world. Formula 90 Liquid is very popular with truck mount users as the same stock solution can be used for wool, polypropylene or nylon carpets without changing your stock solution. All that is needed is to change your metering on the chemical feed and you have a detergent safe and effective on all types of wet cleanable fibres and carpet types.

General Usage
Most economical cost per use on the market
One of the highest dilution ratios on the market! Can be diluted at Woolsafe approval levels 960:1 that's 60mls of product to 60L of water. Can also be diluted 320:1 (180mls to 60L of water) for even more cleaning power. Just think of how many houses just one concentrated Litre of Liquid Formula 90 will clean!
Dry, brittle residues
Liquid Formula 90 dries to a non-tacky, dry, brittle powder which can easily be vacuumed away. Allows a longer lasting, high level of appearance between cleanings.
Safe on a variety of carpets
This aggressive, high pH detergent can safely be used on stain-resistant or wool carpets by diluting 960:1 but allows you to clean even the dirtiest, dingiest polypropylene carpet by using at 320:1.
All the power of a powder in liquid form
We are confident that Liquid Formula 90 will out perform any other detergent on the market. It even performs comparably to the industry's top selling powder, Powdered Formula 90, when diluted 320:1.

Hints and Tips
Easy to use
Light soil or stain-resistant carpet:
For truckmount, concentrated stock solution
mix 300mls to 19L of warm water.
To make a ready-to-use solution (for portables) mix 60mls to 60L of warm water. (960:1 dilution ratio)
Moderate Soil:
For a truckmount, concentrated stock solution mix 500mls to 60L of water.
To make a ready-to-use solution (for portables) mix 1L to 60L of warm water. (640:1 dilution ratio)
Heavy Soil:
For a truckmount, concentrated solution
Mix 1L to 60L of water.
To make a ready-to-use solution (for portables) mix 180mls to 60L of warm water (320:1 dilution ratio)

pH Value: 960:1 9.5 - 10.5
640:1 10.5 - 11.0
360:1 11.0 - 11.5
Coverage: 160 -3,170 sq. mtrs per 4 L
Dilution: Variable (see label)
Appearance: Light blue liquid
Fragrance: Citrus