Streamflo Pump 12v, chemical resistant

Streamflo Pump 12v 40psi 3.8lpm 10mm hose tail, chemical resistant for softwash

FEATURES

2.8 Bar max operating pressure

3.8 Lpm max flow

12 Volt DC, 4.0 Amps

Viton check valve

Santoprene diaphragm

60°C max fluid temperature

3/8" hose barb ports

Self-priming up to 1.2mtr

Integrated pressure/demand switch

The 12v 40psi Streamflo Pump is a versatile tool that can be used to spray a variety of non-flammable liquids, including pesticides, water, ice control chemicals, and water-based sealants or stains. However, it is important to note that the pump should not be used for other purposes once it has been used to spray pesticides. This is because even after the pump has been properly cleaned, there may still be some residual pesticide left in the unit. This residual pesticide could then contaminate other liquids that are sprayed through the pump, posing a potential hazard to plant or animal life.

For example, if the pump is used to spray water for plants, the residual pesticide could be absorbed by the plants and could then harm them. Similarly, if the pump is used to spray water for dust control, the residual pesticide could be inhaled by people or animals, which could also pose a health hazard.

Therefore, it is important to use the 12v 40psi Streamflo Pump only for the purpose for which it was intended. If the pump has been used to spray pesticides, it should be cleaned thoroughly and then designated for use with only non-hazardous liquids. This will help to ensure that the pump does not pose a risk to human health or the environment.